Sam Villa logo
Sam Villa logo

All articles

Sam Villa® Blow Dryer: Care InstructionsUpdated 6 months ago

To clean and maintain your blow dryer, the filter easily unlocks for effortless cleaning! Cleaning your filter is an important factor in keeping your dryer in optimum working condition as build up of debris and hair can cause any dryer to overheat, smoke, or shut down.

1) Unplug your dryer.
2) Twist the filter away from the back of the dryer in a counter-clockwise motion to remove it.
3) Use a small brush with plastic or nylon bristles to clear away lint, hair and debris from the removed filter and from the grid attached to the dryer that protects the fan.
4) If necessary, place a vacuum with a hose against the grid attached to the dryer that protects the fan to draw out hair and debris.
5) If there is any sticky build up on the removed filter, run it under warm water while using the small brush to remove the build up taking caution not to dent or bend the filter.

DO NOT USE WATER OR ANY LIQUID ON THE GRID ATTACHED TO THE DRYER THAT PROTECTS THE FAN. 

6) Allow the removed filter to dry completely before your dryer is plugged back in. Reattach the removed filter in a clock-wise motion.

*See diagram below

Was this article helpful?
Yes
No
Powered by